Anycubic PLA Basic Filament 1kg – Pink

Precise, bubble-free extrusion | Vibrant pink colour | Eco-friendly plant-based material | Wide FDM printer compatibility | Neatly wound for tangle-free feeding

The Anycubic PLA Basic Filament 1kg in Pink is a reliable, easy-to-use filament suited to hobbyists, educators, and designers printing toys, decorative parts, and creative projects on any FDM 3D printer. Each spool is evenly wound and carefully packaged to prevent tangles and ensure a consistent, smooth feed — minimising jams and delivering dependable print results. The filament holds a tight diameter tolerance of 1.75mm ±0.02mm for precise extrusion and bubble-free output, while its vibrant pink (hex #FF8DA1) colour brings finished prints to life. Made from renewable, plant-based materials, it is low-odour and designed for safe, sustainable printing. Simply dry the filament at 45–50°C for 6–8 hours before use for best results, then print at a nozzle temperature of 190–230°C with a heated bed at 55–56°C.

Features

• 1.75mm diameter — compatible with FDM 3D printers using 1.75mm filament
• 1kg spool weight for extended print runs
• Neatly wound spool for consistent, tangle-free feeding
• Precise extrusion with bubble-free output
• PLA material — a widely supported and easy-to-print filament type

Specifications

• Colour Code: Pink  (#FF8DA1)
• Consumable Type: PLA Filament
• Compatible With: FDM 3D Printers with 1.75mm filament compatibility
• Dry Out Before Use: Recommended
• Drying Condition: 45-50 ℃, 6-8 h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.2 mm or above
• Printing Temperature: 190-230 ℃
• Heated Bed Temperature: 55-56 ℃
• Recommended Printing Speed: 50-200 mm/s
• Cooling Time: 8 s
• Maximum Volume Speed (Flow Rate): 12 mm³/s
• Density: 1.24 g/cm³
• Melt Index: 4~10 g/10 min (190 ℃/2.16 kg)
• Melting Point Temperature: 166 ℃
• Vicat Softening Temperature: 55 ℃
• Heat Deflection Temperature (0.45MPa): 54 ℃
• Young’s Modulus: 2534±85 Mpa
• Tensile Strength: 48±5 Mpa
• Elongation at Break: 8±1%
• Bending Modulus: 3360±100 Mpa
• Bending Strength: 90±3 MPa
• lzod lmpact Strength (X-Y): 22±2 kJ/m²
• Tensile Strength (Z): 26±1 MPa
• Product Weight: 1000g

What's in the Box

• Anycubic PLA Basic Filament 1kg – Pink x1